The operation precaution of pallet jack

Time:2019-05-28
The manual pallet jack is a convenient, flexible to use, heavy load, durable equipment, which is a good assistant for cargo handling in the workshop.


During the operation

1.Goods must be neatly placed on the pallet jack.

2.The fork must be completely insert under the pallet.

3.Raise the forklift to a proper height for pull.

4.Stop the cargo after pulled to the destination, lower the fork to the lowest position, and start unloading.

Safety Precautions

1. Check if there's objects around wheel of the pallet jack before using it.

2. Hydraulic forklifts are usually operated by only one person, and it is strictly forbidden to wear slippers when operating the forklift.

3. Overloading is prohibited, the weight of the items must be within the allowable load range of the pallet jack.

4. Drop the goods from a height to the manual forklift pallet is prohibited.

5. The fork must be completely placed under the pallet, the cargo be forked stable during pulling.

6. It is forbidden to load unstable or loosely packed goods.

7. The forklift should be placed in the lowest position during the handling process.

8. When lowering the fork, it is strictly forbidden to extend hands and feet under the fork.

9. During the processing, it is forbidden to drive too fast. It should be kept at a constant speed and decelerated properly when turning.

10. When loading and unloading objects to the forklift, avoid the speed to be too fast and run out of control.

11. Manual forklifts are strictly forbidden to carry people, and it is forbidden to taxi in any place.

12.When the pallet jack is placed, the fork should be position to the lowest and forbidden to place heavy items.

13.It is forbidden to process when the sight of the operator is blocked. The operator should  pay attention to the surrounding environment, do not hit other people and items.
14. Damaged manual hydraulic pallet jack must be repaired or scrapped and must not be used.